You’ve picked the perfect TV, found the perfect spot, and then the drill hits solid brick. If you’re wondering how to mount a TV on a brick wall without cracking it, pulling it off the wall later, or drilling into the wrong thing, you’re in good company. Brick is one of the most common wall types in local homes, and it’s also one of the trickiest to get right. Here’s what to know about brick wall TV bracket choices, anchors and safety, plus when TV wall mounting Sunshine Coast homeowners trust is worth calling in.
Can You Mount a TV on a Brick Wall?
Yes, you can. Brick holds a TV securely when you use the right anchors, a bracket rated for your TV’s weight and a drill suited to masonry. The problem is that “brick” isn’t one thing. Solid brick, hollow brick, concrete block and render all behave differently, and the wrong anchor in the wrong wall is how TVs end up on the floor.
Know Your Wall First
Before you buy a bracket, work out what’s actually behind the paint.
Double Brick and Solid Brick
Older homes often have double brick walls that take masonry anchors well. Even so, many modern bricks contain hollow cavities, which affects the type of anchor you need.
Besser Block and Hollow Block
Besser block is a type of concrete masonry unit, and these blocks are often hollow. Standard plugs can spin or pull out, so hollow block needs anchors designed for the job.
Brick Veneer and Rendered Walls
Plenty of Sunshine Coast homes are brick veneer, where a single brick skin sits outside a timber or steel frame. The internal walls are usually plasterboard, so you’d mount to studs, not brick. Our plaster wall mounting guide covers exactly that.
Choosing a Brick Wall TV Bracket
Not every bracket suits brick. The bigger and heavier the TV, the more it matters. A quick checklist:
- Weight rating: The bracket must be rated well above your TV’s weight
- VESA pattern: The mounting holes on the back of your TV need to match the bracket
- Brick suitability: Check the manufacturer says it’s suitable for brick, and for hollow brick if that’s what you have
- Bracket type: Fixed and tilt brackets put less leverage on the anchors than full-motion arms
That last point matters more than most people realise. A discussion on the Bunnings Workshop community notes that most bricks used in construction these days have hollow cavities, and that if the anchors don’t lock into the brick properly, they could fail under a large TV at full extension.
How to Mount a TV on a Brick Wall: The Basics
This is a general overview, not a substitute for your bracket’s instructions.
- Pick your spot. Think about viewing height and distance before you drill
- Check for hidden services. Use a detector for electrical cables and pipes
- Mark the holes with a spirit level against the bracket
- Drill with a hammer drill and a masonry bit sized to your anchors
- Insert the right anchors for solid or hollow brick
- Fix the bracket and tighten securely
- Attach the arms to the TV, then lift it onto the bracket (a second pair of hands helps)
- Test the weight gently before letting go
Wear eye protection and a dust mask. Brick dust isn’t something you want to breathe in.
Common Mistakes to Avoid
- Using the plugs that came in the box without checking they suit your wall
- Drilling into mortar joints, which are weaker than the brick itself
- Choosing a full-motion arm for a heavy TV without checking the anchors
- Forgetting about cables until the TV is already up
- Skipping the check for hidden wiring behind the wall
When to Call a Professional
If you’re mounting a large TV, a full-motion arm, or you’re not sure what type of brick you have, it’s worth getting it done properly. The cost of a mistake is a damaged wall, a damaged TV or worse. Our TV wall mounting Sunshine Coast service takes care of the bracket, the fixing and the finish. We can also hide the cables inside the wall, and our technicians include licensed electricians who can move power and TV outlets so there are no dangling wires. For more on why it pays to hire a pro, read our guide to the benefits of professional TV wall mounting.
Why Sunshine Coast Locals Choose Brocky’s TV
At Brocky’s TV, we’ve been looking after TVs across the Sunshine Coast since 2006, and our technicians are employees, not subcontractors. Once your TV is up, we can handle the rest too, from soundbar mounting to Smart TV setup, so you’re not juggling multiple tradies. See what local customers say on our Google Business Profile.
FAQs
1. Can you mount a TV on a brick wall?
Yes, using masonry anchors suited to your brick type and a bracket rated for the TV’s weight.
2. What anchors do I need for a brick wall TV bracket?
It depends on the brick. Solid brick takes masonry anchors, while hollow brick or block needs anchors designed for hollow masonry.
3. Can I drill into mortar to mount a TV?
It’s best to avoid it. Mortar joints are generally weaker than the brick itself.
4. Is brick veneer the same as solid brick?
No. Brick veneer has a frame and plasterboard inside, so you’d usually mount to studs.
5. Should I get a professional to mount my TV on brick?
For big TVs, full-motion arms or unknown wall types, yes. A professional also handles the hidden cables.
Final Thoughts
You can mount a TV on a brick wall safely, but the details matter: wall type, anchors, bracket and weight. Get those right and it’ll hold for years. If you’re not sure, don’t guess with a heavy TV. Ready to get it up properly? Contact us today and we’ll sort the mounting for you.